Parts - 4 x Eames Replacement Lounge Chair Black Rubber Shock Mounts
Replacement full set (4 x) black rubber shock mounts for an Eames 670 Herman Miller & Vitra Lounge Chair & Ottoman. Conforms to all correct sizes and material.
Lounge Chair Shockmounts are made from the original rubber compound and include correct hardware for the most authentic replacement part.
We recommend using the epoxy glue 'original weld' by JB Weld for the best possible adherence of these mounts to wooden chairs.
The shock mounts measure 115mm in length x 45mm in width x 12mm in depth. The distance between the two holes is 70mm.
1 - Clean and sand area of original shock mount in preparation
2 - Gently sand back of new shock mount to make slightly abrasive
3 - Clean back of new shock mount and area of application with acetone or white spirit.
4 - Mix and apply an epoxy glue (JB Weld is one such brand) to the shockmount
5 - Put shock mount into place and use a clamp for at least 24 hours
We do not take responsibility for any failed fitments. We would always suggest using professionals to fit them.